10-Ton 2-Way Straight Puller Set (8 pc.)
SKU:
J4232
- Clears a bearing splitter bridge to
- grip the truck rear axle bearing
- behind it
1/2 in. Drive 5/8 in. 12-Point Black Oxide Socket
SKU:
J5420B
- Proto® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
7/8 in. Full Polish Combination Wrench
SKU:
J1228SPL
- Proto Spline Tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and in heavy machinery applications where vibration is prevalent. They are also used in automotive and industrial areas where high performance torque needs to be achieved
- Spline fasteners help tighten high strength bolts to high torque loads
- They help lower the force required to turn standard fasteners by allowing the torque load to be moved away from the corners, helping prevent fastener rounding. They also turn fasteners with damaged corners
1/2 in. Drive 21mm 12-Point Deep Socket
SKU:
J5321M
- Proto® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
3/8 in. Drive 7/16 in. 6-Point Socket
SKU:
J5214H
- Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
3/8 in. Drive Torx® T15 Bit Socket
SKU:
J5239-15W
- 3/8-inch drive slotted screwdriver bit sockets
- 5/16-inch tip size
- 3/64-inch tip width
14mm 12-Point Full Polish Reversible Combination Ratchet Wrench
SKU:
JSCVM14T
- 12 point box end allows for fine indexing, helping to improve speed and access
- 12 point box end fits 4, 6 and 12 point fasteners
- The wrench self aligns with the fastener
11-16 in. x 3/4 in. Satin Open End Wrench
SKU:
J3035
- Satin finish provides corrosion resistance and a slip resistant grip
- 15° angle heads
- Special heat-treated alloy steel permits slim shanks for strength and durability
8-1/16 in. Combination Slip Joint Pliers With Grip
SKU:
J278G
- Has two jaw positions and shear type wire cutter
- Plastisol grips for added comfort
3/8 in. Drive 19mm 12-Point Tether-Ready Socket
SKU:
J5219M-TT
- Proto® Tethered Tool Sockets are manufactured with four detent holes so that the pin detent will engage correctly regardless of the direction the socket is placed on the square drive
- The Positive Control System requires a separate tool to attach or remove the socket, meaning it cannot be removed without specific intent
- Chrome finish is applied after the holes are bored for better corrosion resistance
3/8 in. Drive 1/2 in. Deep #16 Socket
SKU:
J5016DPL
- Proto® Spline tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and in heavy machinery applications where vibration is prevalent. They are also used in automotive and industrial
- areas where high performance torque needs to be achieved
- Spline sockets help tighten high strength bolts to high torque loads. They help lower the force required to turn standard fasteners by allowing the torque load to be moved away from the corners to help prevent fastener rounding. They also turn fasteners with damaged corners
15mm Open End Angle Wrench
SKU:
J3115M
- Full polish finish prevents corrosion
- 15° and 60° angle heads allow wrench to be used in four different turning angles for greater access in tight work areas